Compression & Washerless Kitchen Faucets
Selecting the right replacement faucet for the kitchen can sometimes be quite confusing when a variety of styles and features are in front of you. One of the easiest ways to trip up is to simply buy a retro-looking faucet, only to find out later that it’s not compatible with your old plumbing. However, any lingering confusion you may have will quickly melt away once you understand the different types of kitchen faucets currently available in the market and how each will suit your needs.
Commercially, there are four main types of kitchen faucets on the market. However, three of them are considered washerless (ball, disc, and cartridge), the other type is the old compression type that still uses washers.
So, in this blog we’ll try to understand you about the faucets types, after reading this article you’ll be able to know the internal functions of the faucet. Moreover, we’ll try to know that how a kitchen faucet operates if we change any internal parts.
At the end of this blog post, there will be some questions related to kitchen faucet holes. If you’re looking for a faucet then you must keep reading this blog post.
The ball faucet was one of the first washerless types on the market. It features a single handle that moves a slotted ball valve that slides back and forth to turn on and off. The lateral movement controls both the flow rate and the temperature of the water. These faucets are a little more complicated than the others and have several small parts, like o-rings and springs, that can wear out over time and leak.
The 3rd type is the Ceramic disc valve faucets and these are the latest development in fittings and are by far the most reliable. They are controlled by simply lifting the lever on a one-handle model and turning each knob on a two-handle model. The right mix of hot and cold water is produced in a cartridge specially designed for this purpose. This cartridge doesn’t need any type of servicing or repairs, and even also some of them come with a lifetime warranty. This faucet is usually quite expensive and should be considered a precision instrument. So before you invest in one, make sure your water source is filtered and be careful not to be too vigorous with the controls.
This faucet uses a sealed moving cylinder that moves up and down to regulate the flow of water. Although the function with a handle looks similar to the ball type, the difference is that the handle only moves back to open. with a left and right movement to set the water temperature. The two-handle variant looks almost exactly like a standard compression model, but the separate knobs require no extra pressure to turn off the faucet.